[Click on image to enlarge]

Stage One (v360)

Includes:
XFlash Reprogrammed ECU
Standard 3” Cat-Back Exhaust
Standard 3-inch Down-Pipe with modular High-Flow Catalyst
Pre-Set Adjustable Camshaft Gears
Upgraded Fuel Pump (not shown)

Performance:
0-60mph in 4.0 seconds
Standing ¼ mile in 12.5 seconds at 110mph

Installation difficulty:
Intermediate

Estimated Installation Time:
5-6 hours

Price:
$1970 with Standard exhaust components (shown)



Product Overview:
Our v360 power package ups the ante considerably. Compared to our v330 package, this systemt is designed for those who are willing to sacrifice a little ease-of-installation for outrageous and performance. With the addition of a cat-back exhaust system, the factory muffled exhaust note will be replaced by a deep, yet mellow, growl under hard acceleration. During cruise conditions, the exhaust note is drone-free and pleasant sounding. The addition of our pre-set cam gears results in substantial power gains without sacrificing low end torque or idle quality.

Coupled with careful recalibration of the factory fuel and ignition advance tables, as well as revised rev and boost limits, we’re able to achieve a massive, dyno-proven 80-90 flywheel horsepower gain on an otherwise stock Lancer Evolution. As with all our power packages, this gain is safe and has proven itself to be cable of withstanding the rigors of heavy-duty competition use-- something few others can honestly claim.

As with all of our XFlash-based power packages, you will need to mail (or bring) your ECU to our Danville, CA facilities for the re-flashing of its ROM file. For removal and reinstallation directions,
click here. If you chose to mail it to us, we can usually mail it back to you the same day we receive it, limiting your downtime to a matter of 2-3 days. If you bring it to us, you can even leave the ECU in your car since we can re-flash it through your OBD-II diagnostic port. This takes a matter of minutes and requires virtually no downtime of your car. In additional to ECU re-flash, our v360 package also includes an easy-to-install passive boost solenoid emulator which greatly improves boost response and consistency. Please specify 91, 93 or 94 octane applications.

PRIOR STAGE :: NEXT STAGE

Power-Adding Options:
Test Pipe
Adding our cat-less Test Pipe to the v360 package will greatly improve boost response while adding approximately 15 wheel hp to the system. Please check your local emissions regulations for compliance.
Add: $125 (for off road use only)
 

 

Vishnu Performance Systems
Sales and Tech Support          
Please Ship ECU's Here  
316 South Eagle Nest Lane
Danville, California 94506

Vishnu Performance Installs
1260 Pacific St.
Union City, CA 94587

Email:  sales@vishnutuning.com
Phone: (925) 648-7863
Fax : (925) 648-8042

Home | Products | Downloads | About Vishnu | Support | Terms & Conditions

© 2004 Vishnu Performance Systems, Inc. All Rights Reserved.  Phone: 925.924.9800
Site design by Byte Technology.