Evo Passive Boost Solenoid Emulator Install

What you'll need:
Passive boost solenoid emulator
2-3 inches of vacuum hose

Step 1:
Open the front engine hood. Remove the factory cold air duct. You will have to first remove the two small fasteners which secure it to the radiator support frame.

Remove factory airbox. To do this, you will have to remove the three 10mm bolts that secure it to the engine compartment. You will also have to unclip the connector the Mass Airflow sensor and remove the intake tube that leads to the turbocharger inlet.

Installation difficulty:
Novice

Estimated Installation Time:
15-30 min.

Vishnu Performance Systems
Sales and Tech Support           Please Ship ECU's Here  
316 South Eagle Nest Lane
Danville, California 94506

Vishnu Performance Installs
1260 Pacific St.
Union City, CA 94587