Evo Passive Boost Solenoid Emulator Install (Xflash)

What you'll need:
Passive boost solenoid emulator
2-3 Inches of vacuum line

Step 2:
Locate the factory boost solenoid under the air intake box. You'll see two vacuum lines running from the solenoid. Disconnect the line closest to the front bumper. You'll be able to feel a brass restrictor in the line. Gently squeeze it out while being careful not to damage the line. 

Install the passive boost solenoid emulator between the disconnected vacuum line and the new vacuum line. Connect the other end of the new vacuum line to the stock boost solenoid.

Your all done!

Installation difficulty:
Novice

Estimated Installation Time:
15-30 min.

Vishnu Performance Systems
Sales and Tech Support
316 South Eagle Nest Lane
Danville, California 94506

Vishnu Performance Installs
1260 Pacific St.
Union City, CA 94587