|
Evo Xede
Install
What
you need:
Tiny flat-head
screwdriver
10mm ratchet with extension
Needle nose pliers (optional)
Heatgun or cigarette lighter
Before
you start:
Follow the instructions on how to access your ECU here
Step
3:
Plug the right-most ECU
connector into the plug-in XEDE harness. Then plug all the
connectors into the ECU.
Step
4:
Route the ground wire from the plug-in XEDE harness under the ECU
and attach it to the 12mm mounting
bolt. Without this ground secured, the XEDE’s boost control
feature will not work.
Step
5:
Secure the XEDE unit as shown below using a Velcro strap. Notice how
the communication cable hangs
downwards, allowing quick and easy access when the need arises.
Reinstall the plastic ECU cover
and re-attach the glovebox. When installing the plastic ECU cover,
make sure that the back of the
plug-in harness board doesn’t come into contact with anything
metallic and conductive. There is
a nicely sized pocket of space right behind the ECU completely
devoid of nearby metal.
|
